The Blastline Internal Pipe Coater-II & III are designed to coat the inside of pipes quickly and evenly without the need to rotate the item. Both machines comfortably handle most long life heavy duty protective paint coating systems. Either unit simply couples to a suitable airless spray machine of minimum 45:1 ratio.
In operation a rotating head, powered by an air motor throws paint by centrifugal force at an evenly metered flow against the surface. Pipe coater is manually pulled through the pipe at a pre-determined speed based on paint film thickness and type of coating.
SPECIALTY TOOLS Inner Feed Pressure Roller
Instead of dipping the roller into a paint tray, why not feed the paint into the roller? You get the best of both application worlds, increasing the speed and efficiency of your work-saving time and making a lot of money. Its much easier than you think and Titan has the equipment that lets you get the job done right.
• Up to 40% faster than standard roller application
• The roller never leaves the surface
• Easy to use and easy to clean up
On rough, porous surfaces like stucco and concrete block many contractors apply the coating with a sprayer and then back-roll it into the surface. It can be messy (lots of overspray) and time consuming (two workers). Now imagine what it would be like to spray AND roll at the same time. You save time and make money. That’s what Titan is all about.
• Ideal for very porous and rough surfaces
• Spray on the down stroke and roll on the upstroke
• Save both time and money
SHOT BLAST MACHINE RATIOJET Series RS,roller turbine wheel blast machines are high-efficiency automatic machines used to clean steel sheets and profiled steel workpieces, up to 2500 mm in pass through width
Dry ice blasting “ Dry ice blasting is a revolutionary blasting method using dry ice pellets(solid CO2) as the blasting media.”
The unique feature of dry ice as a blasting material is that it vaporizes on contact with the surface to be cleaned. Treated surfaces are therefore left dry and clean,without residues of detergents or blasting materials.
As the process is completely dry and non-conductive, dry Ice Blasting is ideal for cleaning machinery, electrical installations, electro-mechanical equipment, surfaces and moulds.
Thermal (Metallized) Spray Coatings Arc Spray System
Electric arc spray metalizing users relatively high electrical amperage to melt wire,rather than a flame. Two wires are fed from individual spools into a spray gun. Each wire is given an opposing electrical charge between 375 and 400amps. As the wires feed into the gun,they contact, arc and melt. Compresses air atomizes the molten metal wire and blows it onto the surface. The spray fan is wider than that of flame spray, and is generally more productive.
• For anti-wear and anti-corrosion cold sprayed coatings
• High productivity with spray rates from 8 to 36 kg/hr
• Offshore/oil & gas
• Steel works
• Thermal Power Plants
Electrostatic Powder Coating
Powder coating ensures a superior metal finish by applying the coating with an electrostatic process that achieves uniform powder coverage on the most complex products. This is then fused to the surface (cured) in a temperature- Controlled.
• A beautiful and uniform quality finish without paint runs.
• Cost-efficient, even on small batches or single items.
• Corrosion resistance
• Environmentally friendly (Negligible release of VOCs)